PVC coated fiberglass mat
Product Description
PVC floor is widely used because of light weight, beautiful design, not easy to wear and tear and easy to operation. However, due to the addition of many filling materials, PVC floor has lower strength and greater brittleness. PVC material has the characteristic that it is easy to cause thermal expansion and contraction, so PVC floorings in public place such as airport, mall, hotel, hospital, etc., are easy to bubble and hard to get repaired. According to this phenomenon, NJEFG developped PVC coated fiberglass mat for PVC flooring, PVC coated fiberglass mat is used as stabilizing layer of PVC floor.
PVC coated fiberglass mat is used to produce PVC sports floor. This product uses fiberglass mat as the base material, one side of the fiberglass be evenly coated with melted PVC, then going through the curing process. During the producing of the PVC floor, the manufacturer can use the PVC coated fiberglass mat to produce the floor, the PVC side of this product can be printed with different design then be laminated with wearing layer, and fiberglass side of this product can be laminated with PVC foaming layer. Since the PVC coated fiberglass mat is have been coated with PVC on one side, the fiberglass side of the material can be laminated with the PVC foaming layer very well.
The PVC coated fiberglass mat can also be used as waterproofing material, the fiberglass side of this product can apply to the bitumen and cement very well.
The fiberglass mat can be 30g/m2, 40g/m2 and 50g/m2 or according to the customer's demand. And the final weight of the PVC coated fiberglass mat can be done according to the customer's requirement.
Characteristics
Lower unit weight, high strength, uniform surface
Significantly reduces the expansion rate of the floor
Makes floor more suitable for heating
Increase the producing efficiency of floor and rate of finished product
Free of formaldehyde, environment friendly
Application
Technical Data
Remark: 1. Roll width 1m, 1.11m (±2mm); Roll length: 1300m
2. Roll diameter: 70cm (±2 0mm)
Customization
PVC coated fiberglass mat in above table are the standard types, if customer wants specific unit weight, tensile strength, roll width and roll length, Nanjing EFG CO., LTD can produce as per customer's requirement, offer tailored service to customers from different countries.
Packaging
Markets Nanjing EFG CO., LTD. is rich in experience for export, welcomes cooperation from all of the world.
Delivery PVC coated fiberglass mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer's port by MSK, MSC, CMA, COSCO, YANGMING, APL, etc.
Payment LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.
After sales service
Nanjing EFG CO., LTD tracks cargo of every shipment till customer uses the cargo, and offer any help for customer's demand in any time.
Technical support
If customer meets any problem about technic, Nanjing EFG CO., LTD will supply relative knowledge to help customer find the best solution, and can send technician to customer's factory for guiding if necessary.
Product Description
PVC floor is widely used because of light weight, beautiful design, not easy to wear and tear and easy to operation. However, due to the addition of many filling materials, PVC floor has lower strength and greater brittleness. PVC material has the characteristic that it is easy to cause thermal expansion and contraction, so PVC floorings in public place such as airport, mall, hotel, hospital, etc., are easy to bubble and hard to get repaired. According to this phenomenon, NJEFG developped PVC coated fiberglass mat for PVC flooring, PVC coated fiberglass mat is used as stabilizing layer of PVC floor.
PVC coated fiberglass mat is used to produce PVC sports floor. This product uses fiberglass mat as the base material, one side of the fiberglass be evenly coated with melted PVC, then going through the curing process. During the producing of the PVC floor, the manufacturer can use the PVC coated fiberglass mat to produce the floor, the PVC side of this product can be printed with different design then be laminated with wearing layer, and fiberglass side of this product can be laminated with PVC foaming layer. Since the PVC coated fiberglass mat is have been coated with PVC on one side, the fiberglass side of the material can be laminated with the PVC foaming layer very well.
The PVC coated fiberglass mat can also be used as waterproofing material, the fiberglass side of this product can apply to the bitumen and cement very well.
The fiberglass mat can be 30g/m2, 40g/m2 and 50g/m2 or according to the customer's demand. And the final weight of the PVC coated fiberglass mat can be done according to the customer's requirement.
Characteristics
Lower unit weight, high strength, uniform surface
Significantly reduces the expansion rate of the floor
Makes floor more suitable for heating
Increase the producing efficiency of floor and rate of finished product
Free of formaldehyde, environment friendly
Application
Technical Data
| Code | fiberglass floor mat | Total unit weight | Tensile strength MD | Tensile strength CD | Thickness | Moisture | Paper core diameter |
| g/m2 | g/m2 | N/5CM | N/5CM | mm | % | mm | |
| PC-300 | 40 | 300(±20) | ≥200 | ≥150 | 0.4(±0.03) | ≤1 | 76 |
| Standard | GB/T 24218.1-2009 | GB3820-1997 | GB/T 24218.3-2009 | GB/T11966-1989 | |||
2. Roll diameter: 70cm (±2 0mm)
Customization
PVC coated fiberglass mat in above table are the standard types, if customer wants specific unit weight, tensile strength, roll width and roll length, Nanjing EFG CO., LTD can produce as per customer's requirement, offer tailored service to customers from different countries.
Packaging
- Roll packaging: plastic film, corrugated carton
- Pallet packaging: Pallets should NOT be stacked in more than 2 layers.
Storage
This product should be stored in a dry, ventilated and rainproof place, with temperatures from 5ºCto 35ºC and humidity between 35% and 65%. It is recommended to be kept in intact package when not used to avoid damp.
Markets Nanjing EFG CO., LTD. is rich in experience for export, welcomes cooperation from all of the world.
Delivery PVC coated fiberglass mat will be loaded into container in factory, then be delivered to the sea port, finally be shipped to Customer's port by MSK, MSC, CMA, COSCO, YANGMING, APL, etc.
Payment LC, T/T, CAD, PAYPAL, WESTERN UNION, ETC.
After sales service
Nanjing EFG CO., LTD tracks cargo of every shipment till customer uses the cargo, and offer any help for customer's demand in any time.
Technical support
If customer meets any problem about technic, Nanjing EFG CO., LTD will supply relative knowledge to help customer find the best solution, and can send technician to customer's factory for guiding if necessary.