Glass fiber roving Combimat, woven roving combination mat for pultrusion

Product DescriptionFiberglass complex mat is made by chopped fiber and woven roving by polyester thread .It is widely used in pultrusion, RTM process and hand lay up.It widely produces FRP products like wind energy,boat,and automobile.The end products inclue: dorm,boat hull ,auto shell,cooling vehicles,door and profile,etc .Prod

Featured Products

Fiberglass Woven Roving Combimat, Woven Roving Combo Mat for Pultrusion
Product Description
Fiberglass complex mat is made by chopped fiber and woven roving by polyester thread .It is widely used in pultrusion, RTM process and hand lay up.

It widely produces FRP products like wind energy,boat,and automobile.The end products inclue: dorm,boat hull ,auto shell,cooling vehicles,door and profile,etc .


Product features :

No binder,good compatible with Multi resin.
Simplify the molding process
Improve the production efficiency and reduce cost.
 

Packing &Storage:

Each roll covering by polyethylene plastic bag,then placed into carton,and set on pallet.
Each pallet stack 9 or 16 cartons.The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.

 
Technical Data:
 
TypeWoven Roving/Chopped Strand(g/m2)Water Content(%)Wet Speed(<=S)Width(mm)
EMK600/225600/225<=0.260200-2600
EMK600/300600/300<=0.260200-2600
EMK600/450600/450<=0.260200-2600
EMK800/225800/225<=0.260200-2600
EMK800/300800/300<=0.260200-2600
EMK800/450800/450<=0.260200-2600

Fiberglass Woven Roving Combimat, Woven Roving Combo Mat for Pultrusion
Fiberglass Woven Roving Combimat, Woven Roving Combo Mat for PultrusionFiberglass Woven Roving Combimat, Woven Roving Combo Mat for Pultrusion

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours