is part of the Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Every year, an international jury representing the composites value chain identifies major innovations in various end markets and nominates the standouts for the JEC Composites Innovation Award. The end market categories include Automotive & Road Transportation; Aerospace; Building & Civil Engineering; Design, Furniture, & Home; Equipment & Machinery; Maritime Transportation & Shipbuilding; Sports, Leisure, & Recreation; and Renewable Energy.

Here are the winners in the two automotive categories (other category winners are listed at the end of this article).

Winner: Seamless Integration of Flexible Solar Film in FRP

With partners Mubea Carbo Tech and Apollo Power, Audi seamlessly integrated a flexible solar film with a fiber-reinforced rooftop using high-pressure resin transfer molding (RTM). The solar film can be also incorporated into a hood using this high-volume process that infuses self-extinguishing polyester resin into biaxial fiberglass fabric, the largest of which measures 4 x 6 meters (approximately 13 x 20 ft) and weighs 250 kg (551 lb). Use of natural fibers instead of glass can potentially dramatically reduce the CO2 footprint when coupled with solar. Further, complex 3D shapes with higher degrees of draping can be realized for rail or aerospace applications.

Developed with multiple partners including Broetje Automation and Toray, Tucuna is an enabler for future battery electric vehicles (BEVs) as demonstrated by the redesign of the entire rear body structure of a Jaguar I-Pace. Unlike traditional fabric-based manufacture using resin transfer molding (RTM) or autoclave technology, which are non-viable for volumes of 40,000 units-plus/year, the process lays unidirectional fast-cure continuous carbon or glass fiber to form a skeleton, which is then connected using carbon- or glass-fiber sheet molding compound (SMC).

Diab (Sweden): 100% thermoplastic panel for cabin interiors

MTorres Disenos Industriales S.A.U. (Spain): Innovative Infusion Airframe Manufacturing System

Windesheim (Netherlands): Structural Re-Use of Thermoset Composites

Kairos (France): Kairlin, a new recyclable and compostable material

Fibraworks GmbH (Germany): Winding the future — fibraforce technology

Voith Composites SE & Co. KG (Germany): Marine rotor blades made of Voith Carbon4Stack

Siemens Gamesa Renewable Energy (Denmark): RecyclableBlade

Bcomp Ltd. (Switzerland): Race-ready bond between thermoset and thermoplastic bio-composites

More information about text formats